Cold plastic application with preformed thermoplastic road marking

Here is a application video of PlastiRoute® RollGrip® og PREMARK® Clean the area with a broom to get the best adhesion between PlastiRoute® RollGrip® and the surface Mark the area to get nice sharp edges Use a chalk line to get straight lines PlastiRoute® RollGrip® is a two component cold plastic with anti-skid aggreagates for high friction The two components must be mixed thoroughly The accelerator is mixed into the material and stirred thoroughly The pack of accelerator is sufficient for the material in the bucket PlastiRoute® RollGrip® is poured straight onto the surface and evenly spread with a paint roller Remove the tape while the two component cold plastic is still wet Same procedure with another colour of PlastiRoute® RollGrip® Use PREMARK® preformed thermoplastic road marking on top of PlastiRoute® RollGrip® PREMARK® Rolls are ideal for road marking lines to mark the bays Cut and adapt the flexible PREMARK® Rolls Heat the PREMARK® lines gently to avoid dicoloration of the PlastiRoute® RollGrip® cold plastic markings With PREMARK® it is easy to create special road marking signs and symbols PlastiRoute® RollGrip® and PREMARK® add life to the parking space

10 thoughts on “Cold plastic application with preformed thermoplastic road marking

  1. That left space if awfully confusing. The spot on the ground says it's for electric vehicle yet there is a handicap sign marking in front of it.

  2. Hello There!! I am a producer at INSIDER ( in New York and I would like to feature your clip in a story we’re making on thermoplastic road marking. Is this okay? We’ll be sure to give you a clear, onscreen credit on your footage. Thank you and please let me know!

Leave a Reply

Your email address will not be published. Required fields are marked *